HVAC System

The Oasis from Munters uses a corrosion-resistant polymer heat exchanger to produce dry, cool air without refrigeration. Best suited for hot, dry climates, the system treats makeup air for 50 percent less energy than conventional systems and provides cooling energy recovery and winter heat recovery, according to the company. It can also reduce peak demand loads to help qualify for utility rebates.
 
 

Read more

HVAC Control

ICM Controls introduces the CC750 Comfort Control Center, a variable frequency/voltage blower motor speed control that helps maintain air quality and moisture levels. It controls the blower speed in existing HVAC systems and reduces humidity levels by removing excess moisture in the air.


The product can be used with a system equipped with advanced indoor air quality devices and installed by a trained HVAC contractor. It uses a menu-driven program and is designed for single-phase systems. It is available in 115 VAC and 230 VAC models.

Read more

Heat Pumps

ClimateMaster added 6-ton units to its Tranquility 27 series of geothermal and water-source heat pumps that use EarthPure zero ozone depletion refrigerant. The product line features double-isolated compressor mounting and an ECM variable speed fan motor, foil-backed air handler insulation, MERV11 pleated 2-inch filters and dehumidification mode.


Pumps are available in 2 to 6 tons with efficiencies up to 31.5 EER and 5.1 COP. They are rated for water loop heat pump, ground loop heat pump and ground water heat pump in upflow, downflow, horizontal and split system configurations.

Read more

Emergency Response Kit

The CMS Emergency Response Kit from Draeger Safety Inc. measures hazardous gas using detector tube technology that takes air samples. Gas levels are analyzed by the kit in one to two minutes and the concentration is indicated on the LCD display.


All measurement and calibration information is stored on a bar code on the credit card-sized CMS chip, and an electronic and leak check is performed before each measurement is taken.

Read more

Room Sterilizer

Zimek is a room sterilizing system that that enables the complete sterilization of all interior air within a confined space and disinfects all surfaces wherever free air flows. Inside each system is a micro-particle generator that converts a disinfectant solution into negatively charged ion particulates. The particulates attach to positively charged contaminants in a room and attack all surfaces.


The system kills environmental contaminants, including MRSA, bird flu, toxic mold, mildew, Norwalk virus, insects, allergens and other nosocomial pathogens, in as little as 20 minutes.

Read more

Control Valves

Leslie Controls offers the DBOY line of control valves in sizes of 2 inches up to 8 inches. The line is available for any facility using steam processes and is capable of large flows with Cv’s up to 435, allowing it to replace larger caliber valves.


By utilizing cage-guided trims, valves can be customized and configured to meet individual requirements. Balanced trims are also available. The company offers Quick Delivery System for the line in the case of an emergency.

Read more

Neutralizing Boiler System

JJM Boiler Works introduces a new line of condensate-neutralizing tubes for commercial boilers and warm air furnaces. The tubes are designed to raise the pH level of discharged condensate to a neutral level of 6.5 to 7.0 pH to prevent damaging sewer or septic systems and local outdoor vegetation.


The tubes come in five different sizes and configurations for heating systems ranging from 50,000 Btu to 3 million Btu. Each rechargeable tube comes with galvanized strut clamps and hardware required for installation.

Read more

Heating & Cooling Software

Flomerics has released the Flovent V7, computational fluid dynamics software for simulating the heating and cooling of buildings. It allows users to specify combinations of design parameters, applying a 3D surface to the entire design space. Flovent features the company’s SmartPart for modeling the performance of computer room air conditioning, and the ability to import 2D files and transform them into 3D shapes.


To use the software, the user first defines the design goals, their costs and the ranges over which parameters may be varied.

Read more

Air Handler

The Destiny low-pressure indoor air handler from McQuay International is available with an electric heat option, creating a heating and cooling unit in one product. Available in vertical and horizontal styles, it features a single-point power source to the fan and the heater.


Heat output ranges from 1.5 kW to 55 kW, depending on the unit’s size. There are four levels of control available to reduce overheating and short cycling.

Read more

Fabric Ducting

FabricAir has introduced the Combi line of fabric ducting, made of extra-durable woven polyester, and offered in four variations. Three of the new line’s variants feature fire-retardant capabilities that meet the flammability requirements of UL NFPA 90a-1993, and an independent Swiss textile testing laboratory has certified the line to be free of any harmful substances that could be dispersed into the air. Two of the line’s variants are treated with an antimicrobial agent that prevents microbes from breeding and eliminates those already present in the air stream.

Read more